Concrete / Industry field guide

Why does concrete crack, and what do control joints actually do?

Concrete changes volume as it cures and as temperatures and moisture change. Control joints create intentional weaker lines that encourage shrinkage cracks to form in less noticeable places. They reduce random cracking; they cannot guarantee a crack-free slab.

The short answerConcrete changes volume as it cures and as temperatures and moisture change. Control joints create intentional weaker lines that encourage shrinkage cracks to form in less noticeable places. They reduce random cracking; they cannot guarantee a crack-free slab.

Normal movement versus a changing surface

Plastic-shrinkage cracks can appear while fresh concrete is still losing moisture. Later drying shrinkage and thermal movement can produce fine cracks even in a well-planned slab. A hairline crack with flush edges is different from a crack whose sides are moving apart, becoming wider, or sitting at different heights.

Settlement, heaving, erosion, tree roots, poor base support, and loads beyond the slab’s design can also contribute. The crack pattern alone does not establish the cause. Photograph changes over time and note whether doors, drainage, or adjacent surfaces have changed too.

What a useful proposal should explain

Joint spacing, depth, timing, and layout should suit the slab dimensions and placement method. Saw-cut and tooled joints require different timing, and hot or windy weather can shorten the available working window. Ask where joints will fall rather than accepting a drawing that only shows the slab outline.

A crack cannot always be made invisible. Repair choices range from monitoring to sealing or partial replacement, depending on whether the slab is stable and what appearance is expected. Active movement needs its cause addressed before a cosmetic fill is treated as a solution.

Before you approve the work

  • Ask for a joint-layout sketch before placement.
  • Record crack width, length, and any height difference.
  • Check for ponding or soil loss beside the slab.
  • Get the intended repair method and appearance expectations in writing.

Whenever you're ready

Let's explore your ideas.

Whether you have a question or a project in mind, we'd love to hear about it.

A little about your project

This form isn't accepting messages yet. You're welcome to reach us by phone.

(440) 667-6427
Call us Tell us about your project